SD-09H

Material:
Materials: engineering plastic, copper plate gold-plated

Model: DS TYPE flat dial

Digits:9p
Length: 26.70

Color: red

particulars

Mechanical properties: electrical characteristics
Switching current: 25mA at 24VDC
No switching current: 100mA at 50VDC
Motor force: 1000gf Mat
Mechanical life: 3000cycles Operations
Reflow soldering: 260 earth 5 0C for 3-5 seconds
Initial impedance: 500Mf2 Max
Life post impedance: 100MS2 Max
Insulation resistance: 100Mi2 Min, 60sec at 100VDC
Voltage resistance: 300VAC for 60 seconds
Switching capacitance: 5pF Max at 1MHZ
Work temperature: one 300C to +85 0C
Storage temperature: -40 0C to +85 0C
Packaging specification: Reel or lower upe pipe

Product information two characteristics
Product features:
2.54 mm pin pitch; Standard gold-plated contact; Attached high temperature resistant film;
High temperature resistant plastic body design.
Dialing switch material:
1 base: engineering plastic UL94V 1 0 high temperature material (black)
2. Upper cover: engineering plastic UL94V 1 0 high temperature material (black, red, blue)
3. Push button: engineering plastic ul94v-0 high temperature material (white)
3. Fixed contact and movable contact: copper plate
Pin: copper plate gold-plated
Dial switch welding mode:
1. Hand welding: burn under 30 watts for no more than three seconds or below 350 degrees centigrade
No more than 5 seconds within the 270 degree Celsius.
2. Reflow soldering: within 10 seconds of 225c, please weld and
Push the button to the "OFF" position when cleaning.
Dial switch packaging: all switches are set at "OFF" in the packaging.